吉林大学物理化学学科:笃学致远 润物无声

伴随建系而生的吉林大学物理化学学科是吉大化学学科的重要组成部分,在70年的发展中为整个化学学科的发展建设做出了重要贡献。吉大物化人一直坚持理论与实践并重的教育思想,培养了大批优秀人才。回顾了吉大物理化学学科的历史沿革,展现了吉林大学化学学院物理化学在课程和教材建设、科学研究和人才培养等方面所取得的成绩。在吉大化学70周年华诞之际,谨以此文向为吉大物化学科建设做出贡献的前辈致敬。     

大尺寸电阻加热式碳化硅晶体生长热场设计与优化

大尺寸低缺陷碳化硅(SiC)单晶体是功率器件和射频(RF)器件的重要基础材料,物理气相传输(physical vapor transport, PVT)法是目前生长大尺寸SiC单晶体的主要方法。获得大尺寸高品质晶体的核心是通过调节组分、温度、压力实现气相组分在晶体生长界面均匀定向结晶,同时尽可能减小晶体的热应力。本文对电阻加热式8英寸(1英寸=2.54 cm)碳化硅大尺寸晶体生长系统展开热场设计研究。首先建立描述碳化硅原料受热分解热质输运及其多孔结构演变、系统热输运的物理和数学模型,进而使用数值模拟方法研究加热器位置、加热器功率和辐射孔径对温度分布的影响及其规律,并优化热场结构。数值模拟结果显示,通过优化散热孔形状、保温棉的结构等设计参数,电阻加热式大尺寸晶体生长系统在晶锭厚度变化、多孔介质原料消耗的情况下均能达到较低的晶体横向温度梯度和较高的纵向温度梯度。     

基于Ni-SnO2纳米颗粒的GS-PUF设计

气敏传感器具有气体识别、探测和监测等功能, 广泛应用于工业生产等领域, 但在泄漏预警时缺乏迅速识别和定位等功能. 本文基于传感器制备工艺偏差分析, 通过对传感器气敏机制的研究, 提出一种基于Ni-SnO2纳米颗粒的气敏传感器物理不可克隆函数(Gas Sensor-Physical Unclonable Function, GS-PUF)设计方案. 该方案利用掺杂Ni元素的方法, 结合静电喷雾沉积技术制备Ni-SnO2气敏传感器, 以获取更加稳定可靠的物理特征值, 然后采集气敏传感器对不同浓度下气体的响应数据, 最后利用随机阻值多位平衡算法比较不同组气敏传感器响应电信号值, 实现PUF数据输出. 制备每组样本可产生128位二进制数据的多组PUF样本, 进行对比实验. 结果表明, 所设计的GS-PUF具有气体泄漏源头识别定位的功能, 且随机性提升至99%, 唯一性达49.80%.     

熵的一种通俗教法

熵如力、能量和动量一样是物理学中一个重要概念,若能用一种通俗易懂的方法设计熵的教学,对文科物理的教学有重要意义.为此本文提出了一种通俗的熵的教法,这一教法不需要学生学习热力学第二定律也可以建立熵的概念.具体教学设计如下:通过日常生活例子引入熵的概念(也就是玻尔兹曼熵),设计两个例子让学生会计算熵,通过具体问题的讨论让学生充分理解熵的意义,通过一个实例由玻尔兹曼熵引入克劳修斯熵公式,设计一个演示实验强化教学效果,将熵与环境保护联系起来融入人文情怀,最后还强调了熵计算的不同层次.教学设计完全采用基于问题学习(PBL)的教学模式.     

Lipase‐Supported Metal–Organic Framework Bioreactor Catalyzes Warfarin Synthesis

A green and sustainable strategy synthesizes clinical medicine warfarin anticoagulant by using lipase‐supported metal–organic framework (MOF) bioreactors (see scheme). These findings may be beneficial for future studies in the industrial production of chemical, pharmaceutical, and agrochemical precursors.     

Above,below, and in‐between the two glass transitions of ultrathin free‐standing polystyrene films: Thermal expansion coefficient and physical aging

In previous work we observed two simultaneous transitions in high molecular weight (MW) free‐standing polystyrene films that were interpreted as two thickness‐dependent reduced glass transition temperatures (T_gs). The weaker lower transition agreed well with the MW‐dependent T_g(h) previously reported, while the much stronger upper transition matched the MW‐independent T_g(h) previously observed in low‐MW free‐standing films. Here, we investigate the nature of these two transitions by inspecting the temperature dependence of the films' thermal coefficient of expansion (TCE) and present physical aging measurements using ellipsometry both below and in‐between the two transitions. TCE values indicate approximately 80 to 90% of the film solidifies at the upper transition, while only 10 to 20% remains mobile to lower temperatures, freezing out at the lower transition. Physical aging is observed at a temperature below the upper transition, but above the lower transition, indicative of the upper transition being an actual glass transition associated with the α‐relaxation. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2015 , 53, 64–75     

Taming of Singlet Oxygen: Towards Artificial Oxygen Carriers Based on 1,4-Dialkylnaphthalenes

Naphthalene endoperoxides are known as convenient sources of singlet oxygen (O₂, ¹Δ_g), which is the major product of endoperoxide cycloreversion reaction. However, their potential as carriers of ground-state molecular oxygen (O₂, ³Σ_g) similar to artificial oxygen carriers remains largely unexplored. This is due to the extreme reactivity and cytotoxic effects of the released singlet oxygen. We now report that a compound with a bimodular design, which incorporates an endoperoxide and an efficient physical quencher of singlet oxygen, 1,4-diazabicyclo[2.2.2]octane (DABCO), produces exclusively ground-state molecular oxygen. This result, coupled with the fact that oxygen release rates from endoperoxides are highly amenable to fine-tuning in a very broad range, and open to targeting by ligand attachment, raises the potential of these compounds far above any comparable chemical, or even biochemical sources. In cell culture experiments, we showed that the addition of the endoperoxide-quencher conjugate can enhance and sustain cell proliferation.     

对史密斯-帕塞尔自由电子激光光栅的研究

为了研究史密斯-帕塞尔自由电子激光的输出频率和光栅槽深、光栅槽长、光栅槽宽的关系,对于基于矩形光栅的史密斯-帕塞尔自由电子激光利用粒子模拟软件进行模拟和理论分析。首先,利用粒子模拟软件模拟对于基于矩形光栅的史密斯-帕塞尔自由电子激光进行了研究,发现史密斯-帕塞尔自由电子激光的输出频率随光栅槽深、光栅槽长、光栅槽宽的增大而减少。接着,对史密斯-帕塞尔自由电子激光的光栅槽进行了理论分析,发现每个光栅槽都可以等效为一个LC谐振电路,并发现在史密斯-帕塞尔自由电子激光中存在两种辐射,一种是史密斯-帕塞尔辐射,另一种是LC振荡辐射。最后,对光栅槽的LC振荡辐射进行了估算,发现史密斯-帕塞尔自由电子激光输出频率的模拟值与光栅槽的LC振荡辐射估算值的数量级均为102 GHz,且变化规律上一致。据此推测决定史密斯-帕塞尔自由电子激光输出频率的应该是光栅槽,而不是谐振腔。     

Building an oxidation reactor in Taiwan: From volatile organic compounds to secondary organic aerosols

Large amounts of volatile organic compounds (VOCs) are emitted into the atmosphere from both human and natural sources. A significant portion of VOCs would be oxidized via their reactions with atmospheric oxidants like OH, NO₃, ozone, etc. The products of the oxidation reactions are often of low volatility and may condense to form secondary organic aerosols (SOA). To study the effect of VOC oxidation in aerosol formation, we are building an oxidation flow reactor system, which consists of (1) a 22-l aluminum chamber, (2) an ozone source with an ozone detector, (3) a UV-C (254 nm) lamp, (4) a photoionization detector to measure the effective VOC concentration, (5) various flow/concentration controlling apparatuses, and (6) a scanning mobility particle sizer to monitor the generated particles. Under the conditions of high UV and ozone levels, the oxidation process can be speeded up by orders of magnitude in this reactor. We hope to use this reactor: (i) to learn the “potential” mass of SOA that can be formed from a given VOC source like a traffic or industry site; (ii) to trace back the SOA source by utilizing the shortened reaction times; (iii) to learn the trends from VOC to SOA.